1Safety Assessment
A full site evaluation making sure we can complete the job safely and satisfactorily.
2Present Fuel Cleaning Proposal
a. Determine what is the best approach to efficiently access the tanks and clean the fuel and get client approval.
b. Pre-test fuel in the lab.
a. Determine what is the best approach to efficiently access the tanks and clean the fuel and get client approval.
b. Pre-test fuel in the lab.
3Fuel is Cleaned, Lab Tested and Stabilized
a. Fuel is run through three separate filters to remove particulates and then a water-block filter to remove any remaining water from the fuel. Fuel is then reassessed and run through the cleaning process again until it is clean.
b. A sample of the fuel is taken and sent to the lab for testing.
c. Stabilizers are added to increase the longevity of the fuel.
4Site is Cleaned and Secured
a. We perform a complete examination of the work site to put everything back the way it was before we arrived.
b. Our professional staff ensures the area has been cleaned and there are no fuel spills, no loose contents or any dangerous substances.
5Documentation Provided
You are provided with a certificate indicating your stored fuel complies with the Alberta Fire Code for a given time period.
Before the fuel is cleaned we take a sample for later lab testing. The fuel is then run through the following cleaning process:
- Fuel separation coalescing and filtration process – three separate filters to remove particles
- Waterblock filter – to remove any remaining water
- Test and repeat – until the fuel is clean